CC-Link Hardware Settings
When establishing CC-Link settings, if you have multiple ComProbes you must select which device to sniff. You do that with CC-Link Hardware Settings.
Note: We do not recommend running more than one CC-Link sniffing session at a time on the same PC. CC-Link runs at a maximum baud rate of 10 Mbps. At that rate the PC will have significant performance issues while trying to capture data from multiple CC-Link ComProbes.
- Connect the CC-Link ComProbe to an available USB port.
- Start the analyzer.
-
Select Hardware Settings from Options menu on the Control Window.
CC-Link Hardware Settings Dialog
- Choose a ComProbe device to use from the drop-down list. If you have only one ComProbe connected to your PC, that device is used automatically and you don't need to select it.
- Select OK to save the settings, Cancel to close the dialog without saving the settings, or Help to access the electronic help file.