BPA low energy Update Firmware
When you select the Update Firmware on the BPA Low Energy datasource information tab, the Update BPA low energy ComProbe firmware dialog appears. You use this dialog to update your low energy analyzer with the latest firmware.
It is very important that you update the firmware. If the firmware versions are not the same, you will not be able to start sniffing.
BPA low energy Information Tab Update Firmware Dialog
- Make sure the ComProbe BPA low energy analyzer is attached.
- Select the location of the firmware file.
- Select Flash Device. The download begins, with the Status bar displaying the progress. When the download is complete, you can check the firmware version by checking the Status field.
- Select Done when the update is finished.