Applying Power
The Sodera LE hardware is powered by an external 9 VDC power source using an AC-to-DC power adapter.
Note: Only use the Frontline supplied power. Do not substitute with another power adapter.
To apply power to the Sodera LE hardware, connect the provided AC-to-DC power adapter to the DC9V connector on the rear panel and then connect the adapter into an AC source.
To start the Sodera LE hardware, depress the Power button on the front panel and then release. This action will provide a clean start for the Sodera LE hardware.
The front panel Power LED indicator will be green.
Should the Sodera LE hardware reach thermal overload temperature between 50 °C and 60 °C (122 °F and 140 °F), it will shut down.
If the fan becomes blocked, the Sodera LE unit will power down. Should this happen check that nothing is blocking the airflow to the unit's air inlet, or that nothing is impeding the fan from spinning freely. Clear any obstructions and then apply power to the unit.
