Start Record - Sodera only
The Start Record command starts the capture of data between Classic Bluetooth and Bluetooth low energy devices. This command has no effect on other Frontline device types. This command should only be sent if a successful Start FTS command has previously been processed. The following is an example of the command string for this command.
Start Record
If an error occurs - which could be due to (1) the devices being tested are not Bluetooth devices, (2) the devices cannot be synchronized or (3) a timeout occurs trying to synchronize the device, etc. - then a failure notification response is sent. The form for the failure notification response is the following.
Start Record;FAILED;Timestamp=15:54:00,10/05/2006;Reason=Devices cannot be synchronized
A successful attempt to start Record results in a successful notification response. The form for the successful notification response is the following.
Start Record;SUCCEEDED;Timestamp=15:56:00