Stop Analyze - Sodera Only
The Stop Analyze command stops the sending of data Classic Bluetooth and low energy devices to the ComProbe software. This command has no effect on other Frontline device. This command should only be sent if successful Start FTS and Start Analyze commands have previously been processed. The following is an example of the command string for this command.
Stop Analyze
If an error occurs:
Stop Analyze;FAILED;Timestamp=15:54:00,10/05/2006;Reason=Not in sniffing mode.
A successful attempt to stop sniffing results in a successful notification response. The form for the successful notification response is the following.
Stop Analyze;SUCCEEDED;Timestamp=15:56:00