Stop Sniffing - Classic Bluetooth Only
The Stop Sniffing command stops the sniffing of data between ClassicBluetooth devices only. This command has no effect on other Frontline device. This command should only be sent if successful Start FTS and Start Sniffing commands have previously been processed. The following is an example of the command string for this command.
Stop Sniffing
If an error occurs - which could be due to (1) a time out waiting for the Stop Sniffing command to process, (2) the devices being test are not Bluetooth devices, or (3) the Start Sniffing command was not previously sent or not successful., then a failure notification response is sent. The form for the failure notification response is the following.
Stop Sniffing;FAILED;Timestamp=10:41:00,10/06/2006;Reason=Not in sniffing mode
A successful attempt to stop sniffing results in a successful notification response. The form for the successful notification response is the following.
Stop Sniffing;SUCCEEDED;Timestamp=10:42:00