Stop FTS
This command tells the Automation Server to shut down the Frontline software (if one is running) that was previously launched by the ComProbe Automation Server. Only an instance of the Frontline software launched by the Automation Server can be shut down using this command. If no Frontline software was successfully launched, then a failure notification response will be sent from the server. If the attempt to shut down the Frontline software times out, then a failure notification response is sent from the server.
The following is an example of the command string for this command.
Stop FTS
Failure to shut down the Frontline software results in a failure notification response. The form for the failure notification response is the following.
Stop FTS;FAILED;Timestamp=11:35:00;10/05/2006;Reason=Some Reason
A successful attempt to shut down the Frontline software will result in a successful notification response from the server. The form for the successful notification response is the following.
Stop FTS;SUCCEEDED;Timestamp=11:35:00