802.11 Wi-Fi
The following table identifies the configuration settings for Wi-Fi. The default settings for missing parameters are the existing configuration settings.
| Name | Value(s) | Description |
|---|---|---|
| Channel | 1 - 165 | Channel and Frequency both specifies the capture channel but in different ways. |
| Frequency | 2412 - 5825 |
|
| ExtensionChannel |
-1, (Below) 0, (None) +1 (Above) |
This allows specifying a 40 MHz wide channel when capturing traffic in an 802.11n environment. |
| FcsFilter |
0 (All) 1 (Valid) 2 (Invalid) |
This allows specifying the if ComProbe hardware should capture frames with a bad checksum. |
| CaptureType |
0 (Radio Tap Header) 1 (Per-Packet Information Header) |
Determines the type of radio information to append to a frame. |
| EnableWEPDecryption |
0 (False) 1 (True) |
Specifies if hardware decryption should be enabled. |