Classic Bluetooth
The following table lists the valid settings and corresponding values for Classic Bluetooth devices.
|
Name |
Values |
Default |
Description |
ComProbe |
|---|---|---|---|---|
| ClearChannelMapOnResync |
False=0, True=1 |
0 | channel map gets cleared on resync |
BPA 600 |
| EncryptionSelection |
NoEncryption=0, PinCodeASCII=1, PinCodeHex=2, LinkKey=3 SSP=4 |
0 | Method of Encryption Used | BPA600 |
| FilterOutNullsPolls |
False=0, True=1 |
1 | Filter out Nulls and Polls | BPA600 |
| FilterOutSco |
False-0, True=1 |
0 | Filter out Sco frames | BPA600 |
| LinkKey | 32 digit hex number with 0x |
|
Used only in LinkKeyMode |
BPA600 Sodera |
| Master | 12 digit hex number with 0x | “” | Master bdaddr |
BPA600 Sodera |
| PinCode | 16 character ASCII string | “” |
Used only in PinCodeAscii Mode For Sodera: The master and slave addresses and the PIN must be sent in the same config setting command. See the example in "For Sodera: PinCode Settings". |
BPA600 Sodera |
| PinCodeHEX | 32 digit hex number with 0x | “” | Used only in PinCodeHex Mode |
BPA600 Sodera |
| Slave | 12 digit hex number with 0x |
“” |
Slave bdaddr |
BPA600 Sodera |
| Slave2 | 12 digit hex number with 0x |
“” |
Slave bdaddr when SnifferUIMode=3 (Classic Only Multiple Connectioins). Slave address for the second device in multiple connection. | BPA 600 |
| SnifferUIMode |
Classic Only = 1 le Only = 2 Classic Only Multiple Connection = 3 Dual Mode = 0 |
1 | Datasource modes | BPA 600 |