Welcome to 
802.11 Help
with
|
Getting Started provides information on how to enter the ComProbe software to begin a capture session. Next the Control window, that is the jumping off point for all analyzer functions, controls and menus are presented.
Synchronize your Wi-Fi and Bluetooth Capture
Analyzing simultaneous Wi-Fi and Bluetooth air capture is difficult unless there is a synchronization of the timestamping. Frontline Sodera, 802.11 and BPA 600 make this easier than ever with the ProbeSync function.
When the two of these analyzers are interconnected, one provides a master clock to the other analyzer. By using the same clock to capture the two different technologies the timestamps are synchronized. You can be assured that a Bluetooth packet captured at a specific time is exactly synchronized to a Wi-Fi packet with the same timestamp. This makes analysis of events easier saving time.
The Frontline software provides a Coexistence View where you can simultaneously observe the Classic Bluetooth, Bluetooth low energy, and 802.11 packets in a single display. The Coexistence View provides timeline and throughput views and data displays.
Read more about ProbeSync in the Configure topics, and read more about the Coexistence View in the Capture/Analyze topics.
How Help Is Organized
Getting Started provides information on how to enter the ComProbe software to begin a capture session. Next the Control window, that is the jumping off point for all analyzer functions, controls and menus are presented.
Configuration shows you how to set up the Frontline 802.11 product hardware, apply power, attach antennas, and how to configure the analyzer to capture data. Also this section provides information on how to set up decoder options.
Capture & Analyze is the largest section and presents information on all the tools that you will launch from the Control window. Included in this section is the Event Display, Frame Display, Message Sequence Chart, Bluetooth Timeline, Coexistent View, Packet Error Rate Statistics, and Audio Expert System among others.
Search/Find shows you how to navigate through the data using search, find, and filtering tools. These tools will help you reduce the large sets of data to workable and useable size by focusing on specific protocols and events.
Save/Export helps you save the data from a live capture session and shows you how to export and import that saved data for future analysis.
Information topics include how to contact Frontline's technical support team, and shows you additional ComProbe Protocol Analysis System settings that can help with tailoring the system to your specific needs. There is a large section of additional reference information that may be helpful and save you time.
Last updated: 1/26/2017 1:46 PM