BPA 600 ProbeSync
Any Frontline hardware with ProbeSync™ can be connected together to run off of a common clock, ensuring precise timestamp synchronization.
Simply plug the supplied Cat 5 cable into the OUT connector on the sniffer that will be supplying the clock and connect the other end to the IN connector on the sniffer receiving the clock. . If using a BPA 600 analyzer with a different Frontline analyzer, the BPA 600 analyzer must provide the clock. Combined cable length of all the ProbeSync cables connected at a given time should not exceed 1.5 meters (4.5 feet).
Connect the CAT 5 cable before connecting the USB cable to the BPA 600 hardware. If you must change the ProbeSync connections it may be necessary to cycle the power to the devices to ensure proper synchronization.
Should the CAT5 cable be connected incorrectly, that is OUT to OUT or IN to IN, an error message will appear when the BPA 600 software is run. Refer to "BPA 600 Capture with ProbeSync"